Setting the slave id, Sel/set, Bhaa – Canon 550EX User Manual
Page 103: Eesa
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Setting the Slave ID
With multiple slave units, a slave ID can be assigned to distinguish a slave
unit as being the main flash or fill flash. A flash ratio can thereby be set. Three
slave IDs are available: A, B, and C.
To set a slave unit’s slave ID, press
the
button and select
BHaa.
Pressing the < SEL/SET > button changes
the selection in the following loop:
► EESa--------- 1
(Oft)
M
----------
---- 1
- £
0
-
Press the < + > or < —> button to set
the slave ID (A. B. or C).
Press the <
SEL/SET
> button.
■ icon and slave ID will be
The
«a
displayed.
^ If you want all the slave units to fire at the same flash output, you need not assign a slave
ID.
103