Wireless manual flash with varied flash output – Canon 550EX User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. Wireless Manual Flash With Varied Flash Output
You can set a different flash output for each slave unit (A, B, and C) as
follows.
[SlZg^Vil
MOOe +___________ — S£L BET ZOOM
ifPi 'i T)^
4 On the master unit, press the
* < MODE> button.
select
2 Press the
the selection In the following loop:
Pressing the
> button changes
the
|-»
—*
Flash output -♦
• Flash output-»
----- (Off) -
□
3
Press the < —> button to select
■ignta ON A:BorA:B:C.
iSI ON A;B
or
A;B:C
will blink.
^ Press the < SEL/SET > button.
* A
and the flash output display will blink.
5
6
Press the < + > or < — > button to set
the flash output for A.
Press the <SEL/SET> button.
• B
and the flash output display will blink.
108