Setting the master/slave channel – Canon 550EX User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Setting the Master/Slave Channel
To prevent your master unit from firing another photographer’s slave units,
four channels are provided to differentiate your slave units from unrelated
ones. The master unit and slave unit(s) in the same virireless flash system
must be set to the same channel No.
■4
Press the master unit’s
* button and select M or MULTi.
• The TTL mode cannot be used with wireless
flash photography.
O To set the master unit’s channel No.,
^ press the
select
Pressing the
> button changes
the selection in the following loop:
» Rash output-
I-----------------------(Off)
Press the < + > or < — > button to set
the channel No. (1,2, 3, or 4).
101