Canon HF S21 User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To capture the photos
1 Play back the scene from which you want to capture the photo.
2 Pause the playback at the point you want to capture.
3 Press
[
photo
’
fully.
To capture a photo sequence, hold |
photo
pressed down. The scene
will be played back by frames and each frame captured as a separate
photo.
4 Touch [■] to return to the index screen.
m
IMPORTANT
• When capturing photos on an Eye-Fi card in memory card slot B, pho
tos will be uploaded automatically if you are within the range of a config
ured network. Always verify that Eye-Fi cards have been approved in
the country/region of use. See also Using an Eye-Fi card ([T]
1
50).
NOTES
The data code of the photos will reflect the date and time of recording of
the original scene.
Photos captured from a scene with a lot of fast movement may be
blurred.
Photos will be recorded on the memory selected for recording photos.
[Qi Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [QEl PF24] or [E3 24F|).
Dividing Scenes
You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
Operating modes:
1 Open the [Original] index screen.
102
♦ Video