Canon 150U User Manual
Handling precautions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

;<4i
CT1-7808-000
V.. .\S4V;ÌÀ
© CANON INC. 2003
PRINTED IN TAIWAN
IMPRIMÉ À TAIWAN
Handling Precautions
1
2
.
Before taking pictures of important events, such as weddings and trips, check
to make sure the camera is working properly.
This camera is not resistant to water, and should not be used outdoors if it is raining
or snowing. Keep the camera out of salt spray and excessive humidity. If used at
the beach, clean it thoroughly afterward with a dry cloth.
3. Store the camera in a cool, dry, dust-free place. Be sure to keep the camera out of
direct sunlight, and away from “hot spots” such as the trunk or rear window shelf of a
car. Avoid places where mothballs are used, and use a desiccant in excessive humidity.
4. Do not attempt to disassemble the camera yourself, since there is high-voltage
circuitry inside.
5. The battery may explode or cause burns if disassembled, recharged, shorted,
exposed to high temperatures, or disposed of in a fire.
6. Use a blower brush to remove dust and sand from the lens and inside the camera.
Do not apply any fluids to the lens or body.
Convention
O Warnings you should observe when using the camera.
[^ Additional information on using the camera.
Please note that these instructions are for both the model with the date function and
model without date function. Information relevant only to the model with the date
function is marked with the
symbol.
Document Outline
- Before taking pictures of important events, such as weddings and trips, check to make sure the camera is working properly.
- 0) Shutter button
- Front
- ^ Press the main switch to turn the camera on.
- ^ Decide on the size of your subject.
- Set the focus.
- 4 Compose the shot and take the picture.
- Set the focus.
- picture.
- "I Set the camera to self-timer mode.
- ^ Compose the picture and press the shutter button.
- Select the shooting mode.
- ^ Shooting Moving Objects
- Pi Shooting against Dark Backgrounds
- ^ Shooting Portraits
- ^ Shooting Close-up
- Shooting in Real Time
- Using Red-eye Reduction Function Effectively
- Select the flash mode.
- AUTO ^ Autoflash
- AUTO ^<§> Autoflash with Red-eye Reduction
- %r Flash ON (Fires for all shots)
- Flash ON with Red-eye Reduction (Fires for all shots)
- Flash OFF (Never fires)
- Flash OFF with Manual Exposure Compensation
- ^ Select the Date mode.
- ^ Select the date and time
- combination.
- *1 Select the Date mode.
- 2 Press the [iM] button for more than 2 seconds for date/time set mode.
- J Press the button to select the setting position (numbers blinking).
- 4 Press the CfU button to set the number.
- ^ Repeat 3 and 4 above to set all digits of the date and time.
- ^ Finish setting the date and time.
- [n}>
- ^ Set the camera to Custom Function setting mode.
- Select a function.
- 3 Set the function.