Canon 150U - Manual (Page 5)

- . o
Loading the Battery and Checking the Battery Level
■ Loading the Battery
Applicable Battery: One lithium battery (CR2)
^ Open the battery cover.
1
Load a new battery.
• Align the + - terminals correctly and
insert the battery - end first.
^The [»i> appears on the LCD panel.
Close the battery cover.
• Push the cover closed until you hear a
clicking sound.
■^The date display “........” on the LCD
panel blinks. Set the date and time.
O The camera will not operate if the + - terminals are aligned incorrectly.
■ Checking the Battery Level
Check that appears on the LCD panel when you turn the power on.
Change the battery if
is displayed.
/ I S
(lit) The battery level OK.
(lit) Prepare a new battery.
(blinking) Load a new battery.
S=l>
\J_y
/ I \
A new battery will generally provide enough charge to shoot approx.
14 rolls of 24-exposure film (based on Canon’s Standard Test Method at
normal temperature and with 50% flash use). At low temperatures (-10°C/
14°F), the battery life is approximately one third of the normal figure.
p|| When you take consecutive shots using the flash, the battery level may
drop off temporarily and prevent the LCD panel from displaying
information correctly.