Clarion MAX667VD - Manual (Page 63)

63
MAX667VD
English
Owner
’s ma
nua
l
12. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
CD Changer
For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.
If an error display other than the ones described above appears, press the [RESET] button. If the
problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are
cleared.
Display Cause Measure
ERROR 2 A disc is caught inside the
CD deck and is not ejected. This is a failure of DVD deck’s mechanism and
consult your store of purchase.
ERROR 3 A disc cannot be played
due to scratches, etc. Replace with a non-scratched, non-warped disc.
ERROR 6 A disc is loaded upside-
down inside the DVD deck
and does not play. Eject the disc then reload it properly.
PARENTAL
VIOLATION Parental level error Set the correct Parental level.
WRONG REGION Region code error Eject the disc, and replace correct region code
disc.
DRM WMA files protected by
DRM are played. Perform the operation such as skipping a file.
(Scan, repeat and random playback mode may be
canceled.)
NOT SUPPORT Files not supported by this
unit are played.
Display Cause Measure
ERROR 2 A disc inside the CD
changer is not loaded. This is a failure of CD changer’s mechanism and
consult your store of purchase.
ERROR 3 A disc inside the CD
changer cannot be played
due to scratches, etc. Replace with a non-scratched, nonwarped disc.
ERROR 6 A disc inside the CD
changer cannot be played
because it is loaded
upside-down. Eject the disc then reload it properly.
280QZ6070KA-00.0_EN.book Page 63 Monday, February 27, 2006 2:12 PM