Clarion MAX667VD - Manual (Page 13)

13
MAX667VD
English
Owner
’s ma
nua
l
6. REMOTE CONTROL
Remote control unit
Inserting the Batteries
1. Slide the rear cover in the direction of the
arrow, and remove it.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
bundled with the remote control unit in the
directions shown in the figure, then close the
rear cover.
Note:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
[MUTE]
[VOLUME]
[P.TIME]
[BAND]
[SRC]
[0-9]
[DISC SEL]
[SEARCH MODE]
[MENU] [RTN]
[SET UP] [TOP MENU]
[2-ZONE]
[PBC]
[RDM]
[SLOW]
[ANGLE]
[SCN]
[RPT]
[AUDIO]
[SUB TITLE]
[ ],[ ]
[ENT] [ ],[ ]
[ISR]
Signal transmitter
Operating range: 30˚ in all directions
Signal transmitter
Operating range: 30˚ in all directions
Rear side
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear cover
280QZ6070KA-00.0_EN.book Page 13 Monday, February 27, 2006 2:12 PM