Clarion MAX667VD - Manual (Page 25)

Basic Operations
25
MAX667VD
English
Owner
’s ma
nua
l
Adjusting the brightness, color, hue
and dimmer level
Note:
• The Color and Hue settings can be adjusted only
in the DVD video, Video CD, TV/VTR, VISUAL and
DVD changer modes, and only when the car is
stopped and the parking brake is applied.
• The Hue setting can be adjusted only when the
NTSC mode is selected.
Warning display when CCD camera
is installed
The following warning message is displayed
during use of the CCD camera: “Make sure of
safety around your vehicle”.
Switching the VTR system between
NTSC and PAL
Note:
• This setting is applied only to the VISUAL/VTR
input mode.
Changing the color of the title and
command bars in the screen
Turning on/off the motion of the
background picture
2-1. Touch the [ ]] key of the MONI ADJ item to
display the MONI ADJ screen.
2-2. Touch the [Bright] key repeatedly to select
the adjustment type. Every pressing it
changes adjustment type as follows:
[Bright]
➜ [Color] ➜ [Hue] ➜ [Dimmer] ➜
[Bright] …
“Bright” :
Adjusts the brightness of the display.
“Color” :
Adjusts the color saturation.
“Hue” :
Adjusts the tone of color (red is emphasized
or green is emphasized).
“Dimmer” :
Adjusts the panel brightness when the car
lights are ON/OFF.
The factory default setting is :
When the car light is off: brightest setting (58
steps)
When the car light is on :
medium brightness (29 steps)
2-3. Touch [ [] or []] key to adjust a level.
“Bright”
[
]] : Press to make image brighter.
[ [] : Press to make image dimmer.
“Color”
[
]] : Press to increase color depth.
[ [] : Press to decrease color depth.
“Hue”
[
]] : Press to increase green.
[ [] : Press to increase red.
“Dimmer”
[
]] : Press to make image brighter.
[ [] : Press to make image dimmer.
2-1. Touch the [ON] or [OFF] key of the
CAMERA WARNING item to turn this
function on or off (The factory default setting
is “ON”).
2-1. Touch the [NTSC] or [PAL] key of the
NTSC/PAL item to set the VTR system.
The factory default setting is:
• “NTSC” for the Korea/Taiwan model
• “PAL” for the models for other countries
2-1. Touch the [AUTO], [DAY] or [NIGHT] key of
the COLOR item to set the color mode (The
factory default setting is “AUTO”).
“AUTO” :
The color is changed according to the status
of the car light:
• When the car light is off: light gray color
• When the car light is on: dark gray color
“DAY” :
Set to the light gray color.
“NIGHT” :
Set to the dark gray color.
2-1. Touch the [ON] or [OFF] key of the MOTION
item to set the function (The factory default
setting is “ON”).
280QZ6070KA-00.0_EN.book Page 25 Monday, February 27, 2006 2:12 PM