Canon EOS A2E User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1) Turn the command dial to the “ QB ” posi
tion.
• "OFF” is displayed in the LCD panel.
2)
Turn the main dial to the desired calibra
tion number.
•
Numbers which do not yet contain cali
bration settings blink in the display.
3) While holding the camera to your eye, look
at the blinking far right AF frame in the
viewfinder and press the shutter button.
• A double beep tone Is heard.*
4)
Next, look at the blinking far left AF frame
in
the
viewfinder
and
press
the
shutter
button again.
•
A double beep tone is heard, and “End”
and
the
calibration
number
are
dis
played in the viewfinder and LCD panel
to
indicate
that
the
calibration
proce
dure is completed.
•
If
the
calibration
procedure
is
inter
rupted for a short period and the red AF
frame in the viewfinder goes out, press
the
shutter
button
halfway
and
start
again from step 3.
17