Canon EOS A2E User Manual
Page 132
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXPOSURE CONTROL
Light Metering:
TTL full-aperture metering using 'a 16-zone
SPC (silicon photocell) Three metering modes available:
evaluative metering, spot metering (covers approx 3 5% of
the central picture area) and center-weighted average
metering
Metering Range:
EV 0 to 20 with 50mm f/1 4 lens at ISO 100
(normal temperature)
Shooting Modes:
1. Program AE
2. Shutter-priority AE
3. Aperture-priority AE
4. Depth-of-fieid AE
5. FuilAuto
6
.
Programmed
Image
Control
(Portrait,
Landscape,
Close-up, Sports)
7.
Flash AE (A-TTL or TTL program flash AE with built-in
flash or dedicated speedlite)
8
. X (Flash sync mode)
9. Manual exposure
Camera Shake Warning:
Operates in Full Auto and Pro
grammed Image Control modes Beeper beeps at 2 Hz
when automatically-set shutter speed becomes 0 to 0 5
stops slower than "1 /focal length of the lens in use"
Multiple Exposures:
Up to nine exposures can be preset
Exposure Compensation:
±2 stops in 1/2-stop increments
Auto Exposure Bracketing:
±2 stops in 1 /2-stop increments
Three continuous exposures are taken in sequence:
one at
the standard metered value, one under, and one over
FILM TRANSPORT
Film Speed Setting:
Automatically set according to DX code
(ISO 25-5000) or set by user (ISO 6-6400)
Film Loading:
Automatic Film automatically advances to first
frame when back cover is closed