Canon EOS A2E User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* The bracketing amount is also dis
played in the viewfinder.
3)
Set
the
command
dial
to
the
desired
shooting mode and take pictures.
•
To cancel auto exposure bracketing, re
peat steps 1 and 2 to reset the bracketing
amount to 0.
•
Auto
exposure
bracketing
is
automatically
canceled when the battery is replaced.
•
Auto exposure bracketing cannot be used
in bulb mode or when using flash.
•
Auto exposure bracketing can be used in
X
mode
with
flash
units
connected
through the PC terminal.
•
The
exposure
level
blinks
in
the
LCD
panel
and
viewfinder
display
during
auto
exposure bracketing operation.
If you wish to shift the bracketed exposure
values
toward
over-
or
underexposure,
you
can
add
exposure
compensation
using
the
quick control dial. In this case the LCD panel
may not display the correct values, but expo
sures will be made correctly.