Nikon os Speedlight SB-102 - Manual (Page 14)

BASIC OPERATIONS —continued.
A-3. Set the f/stop on the lens.
When you have determined which
f/stop to use, set this f/stop on the
lens. In the photograph, f/8 is set.
28B.
Non-TTL Automatic
' Operation.
B-1. Attach the Sensor Unit
SU-101 to the camera’s acces­
sory shoe.
Turn the sensor unit’s locking wheel
counterclockwise as far as it will
go, slip the unit's mounting foot into
the camera’s accessory shoe, and
turn the locking wheel clockwise to
tighten it.
• W hen a plastic frame finder or optical view­
finder is mounted on the camera's accessory
shoe, use the optionai sensor holder to
attach the SU-101 to the speedlight bracket.
B-2. Remove the sensor socket
cover®.
Turn the sensor socket cover
counterclockwise, then pull it up.
B-3. Connect the sensor cord to
the SB-102.
Remove the dust-proof plastic cap
from the sensor cord’s speedlight
plug (black). Insert the speedlight
plug into the sensor socket after
aligning the sensor socket index ®
with the red index on the speedlight
plug. When the speedlight plug is
inserted, turn its locking ring clock­
wise as far as it will go to secure
the plug.
Check the 0-ring: Before con­
necting the speedlight plug to the
speedlight, examine the plug’s
0-ring for dust and scratches and
be sure it is properly seated and
lubricated.
B-4. Set the shooting mode
selector switch to “AUTO.”
14