Do not lift saw with raiis or extensions tabies, Warning – Craftsman 315.228310 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
<]
A WARNING
When Mounting an Auxiliary Fence Face, PosHton Mounting Hardware Beyond Arrow at Right and Left as Indicated.
Keep Fasteners Away From Blade.
Do Not Lift Saw With Raiis
or Extensions Tabies.
A
WARNiNG
Debris on rail can misaiign
the rip fence. Workpiece
could bind or suddenly
kick back. You could be hit
or cut. Ciean debris off
fence rail before
positioning fence.
linn ClockwiM to Raise
Blade.
Turn Counterclockwise to
Lower Blade.
• For your safety, read owners manual before
operating saw.
• Wear eye protection.
• Keep blade guard doam and In place for through
cuts.
• Keep hands out of path of saw blade.
• Do not perform any operation freehand.
• Know how to reduce the risk of kickback.
See Instructions for ripping.
• Never reach around or over saw blade.
When ripping, use push stick when fence Is set
2 Inches or less from blade.
When lipping, use push block and auxilary fence
when fence Is set between 1/2 and 2 Inches from
blade. Do not make lip cuts narrower than 1/2 Inch.
Turn off tool and wait for saw blade to stop before
moving workpiece or changing settings.
Disconnect the saw from the power source before
changing blade or servicing.
Do not expose to rain or use In damp places.
15
Fig. 4 b
CRRFnMRN* TABLE SAW 315.228310