Canon HG20 User Manual
Page 95
95
[
Wide TV]: TV sets with 16:9 aspect ratio.
• When the TV type is set to [
Normal TV], during the playback of video originally
recorded with an aspect ratio of 16:9, the picture will not be displayed full screen.
• When the TV type is set to [
Normal TV], photos cannot be captured from the
playback scene (
67). Set it to [
Wide TV] before capturing the photos.
[Speaker Volume]: Adjust (
) the volume of the playback. You can also adjust the
volume using the joystick guide (
37
).
[Demo Mode]: The demonstration mode displays the camcorder's main features. It starts
automatically when the camcorder is powered with the compact power adapter if you
leave it turned on for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn off the
camcorder.
System Setup 2
1
Option not available when the camcorder is connected to an HDTV using the HDMI cable.
2
Option available only from the original movies index screen.
[Wireless Remote Control]: Allows the camcorder to be operated with the wireless
controller.
[Notification Sounds]: A beep will accompany some operations like turning on the
camcorder, the self-timer countdown, etc.
[Power Saving Mode]: In order to save power when the camcorder is powered by a
battery pack, it will automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto power off] will appear.
Menu item
Setting options
[Wireless Remote
Control]
[
On], [
Off
]
z
z
z
z
–
[Notification Sounds]
[
High Volume],
[
Low Volume], [
Off]
z
z
z
z
–
[Power Saving Mode]
[
On], [
Off]
z
z
z
z
–
[Quick Start]
[
Off], [
10 min],
[
20 min], [
30 min]
z
z
–
–
–
[Control for HDMI]
1
[
On], [
Off]
z
z
z
z
–
[Initialize
/
]
[HDD], [Mem. Card], [Cancel]
z
z
z
2
z
31
[Quick Initialization],
[Complete Initialization], [Cancel]
[Photo Numbering]
[
Reset], [
Continuous]
z
z
z
z
–
[Drop Sensor]
[
On], [
Off
]
z
z
z
z
6,
113
[Firmware]
–
–
–
–
z
–