Canon HG20 - Manual (Page 36)

Video
36
1 Press to display the joystick
guide.
If does not appear on the
joystick guide, repeatedly push the
joystick (
) toward [Next] to display
it.
2
Push the joystick ( ) toward .
The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
Deleting a Scene After Recording It
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, select
(
) the icon and press .
3
Select ( ) [Yes] and press .
NOTES
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene this way if after the scene was
recorded you changed the operating
mode or turned the camcorder off.
Playing Back the Video
1
Set the mode dial to .
2
Turn on the camcorder.
The scene index screen appears
after a few seconds.
3
Move ( , ) the selection
frame to the scene you want to
play back.
When you have recorded a large
number of scenes, repeatedly press
or to move between index
screen pages.
4 Press or to begin the
playback.
• Playback will start from the scene
selected and continue until the end
of the last scene recorded.
• Press again to pause the
playback.
Basic Playback
/
/