Canon HG20 User Manual
Page 105
105
Cannot edit Check the memory card
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder (
31).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low.
Cannot play back
- There is a problem with the hard disk/memory card.
Cannot play back due to high temperature
- The camcorder has exceeded its operational temperature (
appears). Turn off the camcorder and let it cool
down before resuming use.
Cannot play back Cannot access the HDD
- There is a problem with the hard disk.
Cannot play back Check the memory card
- There is a problem with the memory card.
Cannot play the movies on the HDD Initialize only using the camcorder
- The camcorder's hard disk was initialized using a computer. Initialize the hard disk with this camcorder
(
31).
Cannot play the movies on this memory card
- Movies cannot be played back from a 64 MB or smaller memory card.
Cannot play the movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder (
31).
Cannot read the HDD
- The hard disk could not be read.
- This message can also appear if condensation has formed (
118). Wait until the camcorder dries
completely before resuming use.
- This message can also appear if the camcorder has exceeded its operational temperature (
appears). Turn
off the camcorder and let it cool down before resuming use.
Cannot record
- There is a problem with the recording media.
- This message can also appear if condensation has formed (
118). Wait until the camcorder dries
completely before resuming use.
Cannot record due to high temperature
- The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and
remove the battery pack. Let the camcorder cool down before resuming use.
Cannot record movies in MXP/FXP mode on this memory card
- Movies cannot be recorded in MXP or FXP mode on a memory card if it is rated Speed Class 2. Select a
different recording mode (
33) or replace the memory card with one rated Speed Class 4 or higher.
Cannot record movies on the HDD (Initialize only using the camcorder)
- The camcorder's hard disk was initialized using a computer. Initialize the hard disk with this camcorder
(
31).