beautypg.com

Troubleshooting – Craftsman 315.220381 User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

Saw blade tends to push wood to
one side when cross cutting.

1. Blade is heeling.

2. Column tube is loose in column

support.

3. Arm is loose or misaligned.

4. Fence/tables are not straight.

5. Blade or teeth are bent or dull.

1. See Squaring the Blade to f/ie

Fence in Adjustments section.

2. See Adjusting the Column

Tube in AssemWy section.

3. See Setting the Arm Lock

Wheel \r\ the Assemb/y section.

4. Check with square; sand or

replace.

5. Sharpen or replace the blade.

See the removal procedure in
Assemb/y section.

59

CRflFnMRN*

RADIAL SAW 315.220381

See also other documents in the category Craftsman Power saws: