Playing an md, To use headphones, Notes – Sony MDS-JE520 User Manual
Page 8: Basic operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Playing an MD
'Q'
You can locate and play back
a track while the deck is
stopped
1 Turn AMS (or press or
►W) until the number of the
track you want to play
appears.
2 Press AMS or I>,
To use headphones
Connect them to PHONES jack.
Use PHONE LEVEL to adjust
the volume.
Q'
You can adjust the analog
signal level output to the
LINE (ANALOG) OUT jacks
1 While the deck is playing,
press LEVEL / DISPLAY /
CHAR repeatedly until the
line output adjustment
display appears.
2 Turn AMS (or press LEVEL
+ /- on the remote) to adjust
the output signal level.
Notes
• The output level for the
PHONES jack is also
changed.
• When you eject the MD or
turn off the power by
pressing the l/(l) switch, the
output level is reset to the
initial setting (O.OdB).
1
Turn on the amplifier and set the source selector to the position
for MD deck.
Press l/C!).
The STANDBY indicator turns off.
Insert an MD.
With the arrow pointing this way
Jt Press l>.
"T The deck starts playing. Adjust the volume on the amplifier.
To
Do the following;
Stop playing
Press ■.
Pause playing
Press II. Press the button again or press O to
resume playing.
Go to the next track
Turn AMS clockwise (or press on the
remote).
Go to the current track
or the preceding track
Turn AMS counterclockwise (or press‘h4^ on the
remote).
Take out the MD
Press = EJECT after stopping playing.