Sony MDS-JE520 - Manual (Page 29)

Editing Recorded MDs
5 Press AMS or YES.
When the track selected in Step 4 has been erased,
"Complete!!" appears tor a tew seconds and the
total number ot tracks in the music calendar
decreases by one.
The track following the erased track begins
playing. (If you erase the last track, the track
preceding the erased track starts playing.)
6 Repeat Steps 1 to 5 to erase more tracks.
To cancel the Erase Function
Press MENU / NO or ■.
Erasing all tracks on an MD
Erasing a recordable MD deletes the disc name, all
recorded tracks, and titles.
1 While the deck is stopped, playing, or pausing,
press MENU/ NO to display "Edit Menu".
2 Turn AMS until "All Erase ?" appears in the
display.
3 Press AMS or YES.
"All Erase??" appears in the display and all tracks
in the music calendar start flashing.
Note
If "Erase ???" appears in the display, the track was recorded
or edited on another MD deck and is record-protected. If
this indication appears, press AMS or YES to erase the track.
Press AMS or YES.
When the disc name, all recorded tracks, and titles
on the MD have been erased, "Complete!!"
appears for a few seconds and the music calendar
disappears.
To cancel the Erase Function
Press MENU/NO or ■ to turn off the "All Erase ?" or
"All Erase??" indication.
Q' You can undo the Erase Function
Use the Undo Function immediately after you erased
the track (see page 37).