If you entered the wrong character, To cancel labeling, Erasing a title on a disc (name erase) – Sony MDS-JE520 User Manual
Page 36: To cancel name erase function, Erasing all titles on a disc (name all erase), To cancel the name all erase function, Q' you can undo the name all erase function, Q' you can erase all recorded tracks and titles, Editing recorded mds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing Recorded MDs
4
Repeat Step 3 until vou have entered the entire
title.
If you entered the wrong character
Press or ►► until the character to be corrected
starts flashing.
Pre^^CLEAR to erase the incorrect character, then
enter the correct one.
5
Press NAME again.
This completes the labeling procedure and the title
appears in the display.
To cancel labeling
Press MENU/NO or ■.
Changing an existing title [Jj
1
1
Press NAME, then do the following:
2
To change
Make sure that the deck is
A track title
Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose title
is to be changed
3
A disc name
Stopped with no track number
appearing in the display
4
2
Hold down CLEAR until the current title is
erased.
3
Enter the new title.
Do Steps 6 to 9 of "Labeling Recordings" on page
34, or Steps 2 to 4 of "Labeling tracks and MDs
with the remote" on page 35 and this page.
4
Press NAME.
Erasing a title on a disc (Name Erase)
Use this function to erase a title on a disc.
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display "Edit Menu".
2
Turn AMS until "Name ?" appears in the display
and press AMS or YES.
3
Turn AMS until "Nm Erase ?" appears in the
display and press AMS or YES.
4
Turn AMS to select "Disc” to erase the disc title,
or the track whose title vou want to erase and
press AMS or YES.
"Complete!!" appears for a few seconds and the
title is erased.
To cancel Name Erase Function
Press MENU/NO or«.
Erasing all titles on a disc (Name All Erase)
Use this function to erase all titles on an MD
simultaneously.
While the deck is stopped, playing, or pausing,
press MENU / NO to display "Edit Menu".
Turn AMS until "Name ?" appears in the display
and press AMS or YES.
Turn AMS until "Nm AllErs?" appears in the
display and press AMS or YES.
"Nm AllErs??" appears in the display.
Press AMS or YES.
"Complete!!" appears for a few seconds and all
titles are erased.
To cancel the Name All Erase Function
Press MENU/NO or B.
'Q'
You can undo the Name All Erase Function
See "Undoing the Last Edit" on page 37.
'Q'
You can erase all recorded tracks and titles
See "Erasing all tracks on an MD" on page 29.
36"