Sony MDS-JE520 - Manual (Page 17)

Recording on MDs
Fading In and Out (Fader)
^ ou can gradually increase the recording level at the
beginning ot a recording (tade-in recording) or
gradually decrease the recording level at the end of a
recording (fade-out recording).
This function is convenient when, for example, vou
don't want the track cut off abruptly when the disc
reaches to its end.
FADER
O 0)
^гs5 ;
-O CD '.iZ)
CD
CtD
CD i5 3 ®'
dp ^
'Q' You can set the duration of fade-in and fade-out
recording independently
1 While the dock is stopped, press MENL' / NO twice to
displiW "Setup Menu".
2 To set the duration of fade-in recording:
Turn AMS to select "Setup 08", then press AMS.
To set the duration of fade-out recording:
Turn AMS to select "Setup 09", then press AMS.
3 Turn AMS to set the duration.
Both the fade-in and fade-out recording durations can
be set in 0.1 second steps.
4 After selecting the duration, press AMS.
5 Press MENU/NO.
FADER
Fade-in recording
During recording pause, press FADER at the position
where you want to start fade-in recording.
•4 in "Fade "4 3.2s" flashes and the deck performs the
fade-in recording until the counter reaches "0.0s".
Fade-out recording
During recording, press FADER at the position where
you want to start fade-out recording.
► in "Fade ► 3.2s" flashes and the deck performs the
fade-out recording until the counter reaches "0.0s".
The deck changes to recording pause when fade-out
recording finishes.
17 "'