You can scroll a title of more than 12 characters, Changing the display, Locating a specific track – Sony MDS-JE520 User Manual

Page 20: Playing mds

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing MDs

^ You can scroll a title of more than 12 characters

Press SCROLL,

Since the display shows up to 11 characters at a time,

press SCROLL to see the rest ot the title it the title has

12 characters or more.

Press SCROLL again to pause scrolling, and again to

continue scrolling.

Changing the display

Each time you press LEVEL/DISPLAY/CHAR (or
DISPLAY) while the deck is stopped or playing, you
can change the display as follows:

Normal display

™ S 0 N G S

12Tr 39mCi6st:"" '■

Press

The contents of a program (only when
"PROGRAM" lights up)_________________

■■

+I+

.--

3 T r I 1 n - , 1 4 S 1 :

Press

Title (Disc name and track name)

S O N G S

D I A R V

Hi'

Press

Output level (The recording level is displayed
while recording.)

Ou tpu tLe'"'e 1

►

1«

Anl 9 - 12. OdE-t: ■ "

Press Q-

Locating a Specific Track

You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control,

and buttons, number buttons, or M.SCAN

button on the remote.

Number
buttons

• M.SCAN

To locate

Do the following:

The next or succeeding During playback, turn AMS clockwise
tracks (or press repeatedly) until you

find the track.

The current or
preceding tracks

During playback, turn AMS
counterclockwise (or press
repeatedly) until you find the track.

A specific track
directly [X

Press number buttons to enter the
track number.

A specific track by
using AMS

1 Turn AMS until the track number

you want to locate appears while
the deck is stopped. (The track
number is flashing.)

2 Press AMS or

By scanning each track
for 6 seconds (music
scan) [T

1 Press M.SCAN before you start

playing.

2 When you find the track you want,

press to start playing.

When you directly locate a track with a number over
25 d
You must press >25 first, before entering the

corresponding digits.

Press >25 once if it is a 2-digit track number, and twice

if it is a 3-digit track number.

To enter "0", press button 10.

Examples; • To play track number 30

Press >25 once, then 3 and 10.

• To play track number 100

Press >25 twice, then 1, 10 and 10.