Sony SLV-789HF - Manual (Page 9)

step 3: Hookups (continued)
t
Ш
r
0 The TUNER PRIiSET menu appears Set
ANPENNA/CABLE (o ANT and press OK. For
detaUs, sec page 52.
G Tlie AUTO PRESIH' starts.
Normal display
и^ИЕЕЯ Plus+ GOLD system channel setup
O The SMART O lANMEL MAPPING menu
appears. Press f/♦/♦"/•♦ to enter the ZIP/
POSTAL CODE in your area and press OK. (You
can also use the number buttorcs to enter the
ZrP/POSTAl.CODE.)
О The CABLE ЮХСОКТКО! i
Select OPF and press OK.
1 Press MENU, then select SETTINGS and press (^j|
OK.
2 5ieiect SET VCR Plus t- CHANNELS and press
OK.
3 Select AUTO and press OK.
4 Press l/(!) to turn off the VCR.
■’Ё,
201 Getting Started Getting Started j 21
e;(
sup 3: Hookups (continued)
The VCR receives the program information signal from 0:(X) am to 5;00 am
while the VCR is turned off, and set up the channel for the VCR Plus+
GOLD system recording. After channel setup is finished, you can record TV
programs using the VCR Plus+ GOLD system. For details, see page 59.
Notes
• U lakes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• If die channels in your area don't carry tiie program information signals, set the
program guide channels manually. For details, see page 62.
• If the CHOOSE YOUR CABLE CH MA l P menu appears the first time you turn on
the VCR after finishing channel setup, select die MAP number. For details, see
page 61.
Automatic clock setting
Once you've set up the VCR, it aulomaticalJy sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clcxrk, even for Daylight Saving Tune. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the charmels in your
area do not carry time signals, set the cltKk manually. For details, see
page 43.
Hookup 4 Page«!2'?.tp26:
Incompatible cable box with many scrambled
channels
Recommended use
Use this hookup if your cable company cannot supply a cable box that is
compatible with the VCR's cable box control feature, and your cable system
scrambles all or most channels.
What you can do with this hookup
• Record any channel by selecting the channel on the cable box
What you can't do
• Record with the cable box timned off
• Record one channel while watching another channel
Rear ofTV
VHF/UHF
--
VHF
[Oj
UHF
Match the type of
connector on your
TV: A, B, or C.
For connector
types B and C. no
UHF connection
is required.
-cm—»- —