Sony SLV-789HF - Manual (Page 12)

Step 3: Hookups (continued)
0 The TUNliR PRESET menu appears. Set
ANTI-;NNA/CABLE to cable and press OK.
For details, see page 52.
О The AUTO PREiiET starts.
ШЕНВШ1Ж1'2_____________Г
Normal display
4 Preset the cable box output channel (usually 2,3 or 4). For details, see
page 54.
O Press MENU, then select SETl'INGS and press
OK.
О Sc-lecf TUNER PRESET and press OK.
О llnler the cable box output channel.
О 5et MANUAI. SET to ADD and press OK. Cable box output channel
The VCR Pius+ GOLD system channel setup
[e ■niiiMumiffl»
ГаТ»Етг11из 1
1 Press MENU, then select SETTINGS and press
OK.
2 Select SET VCR Plus+ CHANNELS and press
OK.
3 Select AUTO and press OK.
4 Press !/(!) to turn off the VCR.
The VCR receives the program information signal from 0;00 am to 5;00 am
while the VCR is turned off, and set up the channel for the VCR Plus t-
GOLD system recording. After channel setup is finished, you can record TV
programs using the VCR Plus+ GOLD system. For details, see page 59.
Notes
• To use the Smart Charmel Mapping feature, set the A/S switch to "A."
• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR Ls turned
off and no timer recordings are set.
• If the channels in your area don’t carry the program infonnation .signal.s, set the
program guide channels manually. For details, see page 62.
• If the CHOOSE YOUR CABLE CH MAP menu appears the first time you turn on
the VCR after finishing channel setup, select the MAP number. For details, sc(‘
page 61.
О Press MENU to exit the menu.
32 \ Getting Started Getting Started I 33
Step 3: Hookups (continued)
VCR Plus+ GOLD channel setup for scrambled channels
To set the program guide channels for scrambled channels, enter all the
scrambled channels you want to record and the cable box output channel
(usually 2, 3, or 4) after finishing smart clrannel mapping. For details, sec
page 62.
O Find tlie VCR Plus+ GOLD Channel Listing in
your program guide. For details, see page 58.
0 Select SET VCR Plus+ Cl lANNELS and press
OK.
О Select MANUAL and pre-ss OK.
О Enter tlie program guide dianncl, tlten Uie cable
box output channel.
О Press OK.
О Pmss MENU to exit the r
Automatic dock setting
Once you’ve set up the VCR, it automatically sets the dock the first time you
turn off the VCR. After that, whenever you him off the VCR, it diecks the
time and adjusts the clock, even for Daylight Saving Tiine. The VCR sets the
clock by picking up a time signal provided by some TV channels.
Lf you want to use the timer to record right away, or if the channels ii\ your
area do not carry time signals, set the clock manually. For details, see
page 43.
• To use tlie Auto Clock Set feature, set theA/B switch to "A."
Program guide channel
Cable box output channel