Sony SLV-789HF - Manual (Page 11)

с
f
Step 3: Hookups (continued)
CSSSEI^S setup
Set the RF UNIT switch to
CH3 or CH4, wlilchever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 104.
If you inade A/V
connections (from page 9),
you can skip this step.
Turn on your DIRECTV
digital satellite receiver.
Tress EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change Utc
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desiri?d,
and press OK. For details, see page 36.
O The C1.0CK SET menu appears. Select AUTO
and press OK. For details, see page 38.
O The SMART CHANNEI. MAPPING menu
appears. P r e s s ' ♦ / 4 t o enter the ZIP/
IxiSTAL CODE in your area and press OK, (You
can also use the number buttons to enter the
2UVPOSTAI.CODE.)
O The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 46. =Ш=1
© Enter your DIRECTV digital satellite receiver
code number and press OK. For details, see
page 46. ГШ_)
0 Set your DU^ECTV digital satellite receiver output channel (BOX OUTPUT
CH) to LINE and press OK.
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving 'lime. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see
page 43.
Note
• To successfully record a program from the DIRECTV digital satellite receiver,
proceed as follows:
- l,eave the DIRECTV digital satellite receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DIRECTV digital
satellite receiver.
- To record or receive locked channels, unlock the channel before the VCR .starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- S(5me programs are copy protected- You cannot record these programs.
continued
281 Gsttii g Started Getting Started I 29
Step 3: Hookups (continued)
,Pages;30 to 35
Incompatible cable box with only a few scrambled
channels, using an A/B switch
Recommended use
By using an A/B switch (not supplied), this hookup allows you to record
both scrambled and unscrambled chartneb conveniently.
What you can do with this hookup
• Record any urxscrambled channel by selecting tl\e chartnel directly on the
VCR (the A/B switch is set to A)
• Record any scrambled diannel by selecting the channel on tiie cable box
(the A/B switch is set to B)
What you can't do
• Record one scrambled channel wliile watching another channel (the A/B
switch Is set to B)
Rear of TV
VHF/UHF
____ fc] A Match the type of
^— connector on your
or TV; A. B. or C.
VHF
---- —iol ^ Fof connector
jo I types B and C, no
or UHF connection is
required.
VHF
setup
1 Set the RF UNIT switch to
CH3 or CH4, whichever
channel is not used in your
area. If both are used, sot the
switch to either channel-
For details, see page 104.
If you made A/V
connections (from page 9),
you can skip tins step.
2 Set the A/B switch to "A."
3 Press EASY SET UP on the VCIL
O The !,ANGUAGE menu appears. Change the
on-serwn disf’lay language to Spanish
{ESPAÑOL) or French (I-’RAN^AIS) if desired,
and press OK. For details, see page 36.
0 ThcCIOCKSET menu appears. Select AUTt)
and press OK. For details, see page 38.
О ТЪе SMART CHANNEI. MAJ’PINC menu
appears. Press t/4/^/^ to enter the ZIP/
POSTAi, CODE in your area and press OK. (You
can also use the number buttons to enter the
ZIP/POSTAI.CODE.)
О The CABLE BOX CONTROL menu appe.
Select OIT and pn*ss C)K.