Memory dialing, Storing memory dialing numbers, 1 press pgm – Sony SPP-1000 User Manual
Page 22: 2 for one-touch dialing, For speed dialing, 1 press speed dial, 2 press a dialing key between 1 and 7, 3 dial the phone number you wish to store, 4 press pgm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Memory dialing
You can store the numbers you
frequently call into the memory
so Uuit you can dial a number
with the touch of one (one-
touch dialing) or two (speed
dialing) buttons.
-SPEED DIAL
button
Storing memory dialing numbers
While storing a number, you
cannot receive calls.
I
•
Do not enter a memory dialing
number that exceeds 16 digits
(the tone and pause digits are
each counted as one digit);
otherwise you will hear five
short error beeps and you must
start over again.
1
Press PGM.
The TALK lamp flashes.
2
For one-touch dialing:
Press one of the three ONE-TOUCH DIAL buttons (A-C).
You hear a confirmation beep.
For speed dialing:
1 Press SPEED DIAL
2 Press a dialing key between 1 and 7.
You hear a confirmation beep.
3
Dial the phone number you wish to store.
If you enter a wrong number, press PGM and go back to
step 1.
4
Press PGM.
You hear a confirmation beep, and the TALK lamp goes
out.
Note on storing numbers---------------------------------------
Do not let more than 20 seconds elapse between any two steps of
the storing procedure.
To change a stored number------------------------------------
If you store a new phone number in a one-touch dialing button or
a speed dialing key that already has a number stored in it, the old
number will be erased.
{ I
Memory dialing