Hanging the base unit on a wall – Sony SPP-1000 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Placing the phone units
Hanging the base unit on a wall
Wall plate
Telephone line
cord (supplied)
AC power adaptor cord
I
a
To mount the wall bracket
directly on the wall« use the
supplied screws.
If your telephone outlet is not
modular« contact your telephone
service company for assistance.
0
Modular
1
Reverse the hang*up tab as illustrated.
2
Press the AC power adaptor cord and the short
telephone line cord into the wall bracket.
3
Hook the wall bracket to the wall plate and plug
the telephone line cord into the telephone
outlet.
4
Insert the tabs on the top of the wall bracket
into the base unit and press the phone so that
the lower tabs on the wall bracket go into the
base unit.
Then extend the antenna fully.
5
Connect the AC power adaptor and the
telephone line cord.
For details, see the "Connecting the base unit" section
(page 11).
1 2 I
Settingup