Connecting the base unit, Modular, 3 fully extend the antenna – Sony SPP-1000 User Manual
Page 11: Note on the ac power adaptor, Polarity of the plug
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the base unit
Read the next page first if you want to hang the base unit on a wall.
I
•
Be sure to catch the AC power
adaptor cord on the hook after
you set the DIAL MODE switch.
(See page 15.)
I
a
Connect the AC power adaptor
to a continuous power supply;
otherwise the battery pack being
charged will have a shorter life.
I
a
If your telephone outlet is not
modular, contact your telephone
service company for assistance.
0
Modular
Connect one end of the AC power adaptor
(supplied) into the DC IN 9V jack, and the other
end into an AC outlet.
A
Plug one end of the long telephone line cord
(supplied) into the TEL LINE Jack, and the other
end into a telephone outlet.
3
Fully extend the antenna.
Make sure it points toward the ceiling.
■ Note on the AC power adaptor-------------------------
Use only the AC power adaptor supplied. Do not use any other
AC power adaptor.
Polarity of the plug
Setting
u p 1 1 1