Adjusting the convergence manually – Sony KP- 57WV600 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Convergence Manually
For details on using the
Setup Menu, see page 83.
The Convergence feature gives you more control over the picture's
convergence than the Flash Focus feature, allowing you to fine-tune the
convergence.
Before using the manual Convergence, you must first perform Flash Focus
(as described on page 44).
1
Press MENU to display the Menu.
2
Move the joystick or to highlight the Setup icon and press
©.
3
Move the joystick to highlight
Convergence
and press ©.
A pattern of white crosses appears, with a yellow [ ] around one
of the crosses. Aligned crosses (which do not need adjustment)
look white and have little or no red or blue showing. Crosses that
are not aligned show red or blue shades beyond their edges.
+
+
+
+
+
+
+
+
+
+
+
+
+
H-
+
H-
-f-
+
+
+
+
C+]
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
You can scroll up and down through the 9x7 field of crosses to
manually converge all portions of the screen.
Using the joystick, move the [] to surround a cross that you want
to adjust. Press ©. The [ ] changes to red.
If the cross that you selected has red edges, move the joystick
until the red image is replaced with a white cross. Once you have
finished this (or the cross does not have red edges), press ©. The
[ ] changes to blue.
If the cross you selected has blue edges, move the joystick until
the blue image is replaced with a white cross. Once you have
finished this, press ©. The [ ] changes to yellow again.
Repeat steps 4 to 6 to adjust other crosses. When finished, press
MENU
to exit the Setup Menu.
45