Antenna hookup, Use this hookup if you're using, Hookup 1 – Sony SLV-690HF User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 1
Pages 9 to 11
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
□ Use this hookup if you're using;
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
-® A
or
VHF
Match the type of
connector on your
TV: A. B, or C.
B
UHF
VHF
UHF
CO Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF Match the type of
—e A connector on your
TV: A, B, or C.
or
VHF
For connector types
UHF
VHF
—g'
UHF
B and C, no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that vou can connect the cable to the VHF/UHF
IN connector. If you have separate cables for VHF and UHF antennas, you should use
a U/V band mixer (not supplied). For details, see page 50.
Getting Started
i
9