Vcr setup, Hookup 1: vcr setup, Rf unit – Sony SLV-690HF User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Hookup 1:
VCR setup
RF UNIT
jCH3
'CH4
IQ
1
Set the RF UNIT switch to '
CH 3 or CM 4, whichever
channel is not used in your
area. If both are used, set J
the switch to either
■
channel.
For details, see page 49. If you made A/V connections (page 8), you can
skip this step.
2
Change the on-screen display language if desired. For details, see
page 22.
O
Press MENU and select LANGUAGE,
© Select the language, and press EXECUTE.
»■ENGLISH
FRANÇAIS
ESPAÑOL
Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to ANT. For details, see
page 23.
TUNER PRESET
CH2
►ANTENNA CABLE «ANT
CABLE
AUTO PRESET
MANUAL SET -ADD
ERASE
AFT »ON
OFF
FINE TUNING
4 Preset the channels into the VCR. Select
AUTO PRESET and press EXECUTE.
TUNER PRESET
CH2
ANTENNA/CABLE-ANT CABLE
► AUTO PRESET
MANUAL SET
-ADD ERASE
AFT
-ON OFF
FINE TUNING
- PLEASE WAIT ►
10! Getting started