Sony SLV-690HF - Manual (Page 8)

step 3: Hookups (continued)
Audio/video (AA^) hookup Page 8
If your TV has audio/video (A/V) input jacks, you will get a better picture
and sound if you hook up your VCR using these connections. In addition,
for a true "home theater" experience, you should connect the audio outputs
of your VCR or TV to your stereo system. If your TV doesn't have A/V
inputs, see the following pages for antenna or cable hookups.
If you're not planning to use your VCR to record programs, you're finished
setting up the VCR after you've made the connections shown on page 8.
If you want to record off-air or off your cable TV system, complete these
connections first, and then go to the following pages for antenna or cable
hookups.
□ Use this hookup if your TV has stereo jacks
VCR Stereo receiver
Audio/video cable (supplied)
10 Use this hookup if your TV doesn't have stereo Jacks
VCR Stereo receiver
Note
To play a tape in stereo, you must use the A/V connection.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-
40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Getting Started