To save a recording, Tips, Notes – Sony SLV-690HF User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording TV programs (continued)

To save a recording

To prevent accidental erasure, break off the safety
tab as illustrated. To record on a tape again, cover
the tab hole with adhesive tape.

Safety tab

Tips

• To select a channel, you can use the number buttons on the remote commander.

Enter the channel number, then press ENTER.

• You can select a video source from the LINE IN jacks using CH +/- . When you use

CH +/-, "L" in the display window appears between the lowest program position
and the highest one.

• The display appears on the TV screen indicating information about the tape, but the

information won't be recorded on the tape.

• If you don't want to watch TV while recording, you can turn off the TV, When using

a cable box, make sure to leave it on.

Notes

• The remaining tape length may not be indicated accurately for short tapes such as

T-20 or T-30, or tapes recorded in the LP mode.

• The display does not appear during still (pause) mode, search mode or slow-motion

playback.

• It may take up to one minute for the VCR to calculate and display the remaining

tape length after you press DISPLAY.

Basic Operations