Sony SLV-690HF - Manual (Page 37)

To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press POWER. The
TIMER indicator turns off and the VCR switches on. Remember to press
POWER to reset the VCR in tinier recording standby after using the VCR.
You can also do the following tasks while the VCR is recording;
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV program.
Tip
To cancel the procedure, press VCR Plus+ before pressing ONCE, DAILY or
WEEKLY.
Note
• If the VCR does not accept the PlusCode, this means that:
- The PlusCode is incorrect.
-ONCE, DAILY or WEEKLY was selected incorrectly. You cannot select DAILY or
WEEKLY for a program that airs more than seven days ahead.
CO
01
O
■a
«
o
3
Basic Operations 37