Hookup 4, Vcr setup, Rf unit – Sony SLV-690HF User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 4:
VCR setup
CT
--0
—■
® i
©
RF UNIT
jCH3
'CH4
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set
the switch to either
channel.
For details, see page 49. If you made A/V connections (page 8), you can
skip this step.
2
Set the A/B switch to "A."
3
Change the on-screen display language if desired. For details, see
— page 22.
O Pres.s ME.MU and select LANGUAGE
© Select the language, and press EXECUTE.
► ENGLISH
FRANÇAIS
ESPAÑOL
Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to CABLE. For details,
see page 23.
TUNER PRESET
CHI
►ANTENNA/CABLE
ANT»CABLE
AUTO PRESET
MANUAL SET
•ADD ERASE
AFT
•ON OFF
FINE TUNING
Preset the unscrambled channels into the
VCR. Select AUTO PRESET and press
EXECUTE.
TUNER PRESET
CHI
ANTENNA / CABLE
►AUTO PRESET
ANT
CABLE
MANUAL SET
•ADD
ERASE
AFT
FINE TUNING
•ON
OFF
PLEASE WAIT ►
Preset the cable box output channel (usually 2, 3 or 4). For details, see
page 25.
O
Press MENU and select TUNER PRESET.
Cable box output channel
0 Enter the cable box output channel.
© Set MANUAL SET to ADD and press EXECUTE.
TUNER PRESET
ANTENNA / CABLE
ANT«CABLE
AUTO PRESET
► MANUAL SET
•ADD ERASE
AFT
•ON OFF
FINE TUNING
Getting Started ' 19