Sony KP-61XBR300 - Manual (Page 60)

Cwmot receive digital channels (when a
DTV receiver Is connected)
♦ C'htvk Ihc DTV INPUT setting in the Sli T UP
monu- (SCO "1ТГ\' INPUT" on page 42)
♦ Chock the connections between the DTV receiver
anU the projection TV. (see pages 9 and 10)
♦ Check your кка! listings to lind out if you can
receive digital broadcasts in your area.
|«сеИгё^ 1Фрег channels
>iirhen lining ahlntenna
' i-t»' ••I' > • * Ч » Sv. f > s-NV •
♦ Make sure CABLE is OIT- in the CHANNEL SET
UP menu, (see "CABLE" on page 37)
♦ Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory, (see
"AUTO PROGRAM" on page 37)
. N o ' c o l o f , , У '
♦ Adjust the COLOR in the VIDEO menu, (see
"COLOR " on page 32)
♦ Black and white programs cannot be seen in color.
♦ Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition, (see
"To perform AUTO SET UP again" on page 22)
Only snow and noise appear on the
screen
♦ Check the CABLE setting in the CHANNlil. SE f
UP menu, (sec "С.ЛВ1.1"' on page 47)
♦ Check the anienmi/cable connectituis.
♦ Make sure the channel is broadcasting programs.
♦ Press ANT to change the input mode, (see "AN T"
on page 23)
R potted lines or stripes
Adjust the antenna.
Keep the projection TV away from noise sources
such as cars, neon signs or hair-dryers.
jTV is fixed to one channel . ^
♦ Use AUTO PROGRAM to add receivable channels
that are not presently in TV's memory, (see "AUTO
PROGRAM" on page 37)
♦ Try turning CHANNEL FIX off. (see "CHANNEL
FIX" on page 37)
Use a highly directional outdoor antenna or a cable
(when the problem is caused by reflections from
nearby mountains or tall buildings).
Cannot operate the menu
♦ If the item \ou want to choo.se appears in gra\. vou
cannot select it.
♦ Press tlie projection r\'‘s pow er button off and on
auain.
Cannot receive any channels when
usingcableTV .«. n
♦ Check the connection w ith a cable box again, (see
pages 6 and 8)
♦ Make sure CABLE is ON in the CHANNEL SET
UP menu, (see "CABLE" on page 37)
♦ Use AUTO PROGRAM to add receivable channels
that are not presently in the TV's memory, (see
"AUTO PROGRAM" on page 37)
Cannot gain enough volume when using
ja.ca^ej^ -.-«.eesv ¿iK'.’"
♦ Increase the volume at the cable box. Then press
TV (FUNCTION) and adjust the projection TV's
volume.
CHANNEL INDEX does^i^ot display iall ^
available channels
♦ Make ^ure CABLE ON iii the CHANNEL SET
UP menu, (see “CABLE” on page 37)
♦ Use AUTO PROGRAM to add receivable channels
that are not presently in the TV’s memory, (see
“AUTO PROGRAM” on page 37)
56