Note – Sony KP-61XBR300 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting a VCR and
Projection TV to a Cable Box
1
Conno
. 1
llic single (input) iaek ol the splitter to
the ineoining enhie conneetion. .ind eonneet
the other two (ompnt) jaeks (using the eoaxial
eahle) to IN on the eable box and VHF/UHF
on the projeetion TV.
2
L’sing a coaxial cable, connect OUT on the
cable box to IN on the VCR.
3
Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
* If your VCR is not equipped with S VIDEO, use
a VIDEO cable (yellow) instead of the S VIDEO
cable.
Note;
• To view scrambled channels through the cable box.
select the video input which the cable box is
connected to by pressing TVA^IDEO.