To perform auto set up again, To obtain an optimum convergence, Note – Sony KP-61XBR300 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To perform AUTO SET UP again

• Press Sl”V {'V inside the tirop-down panel on llie

pu'ieetion rv. and jx'rl'orm steps on paee 21.

• Pre^sO^ANNi■:l,+. CHANNPd. otA'OLUMP:

to seleel a language.

• Press

XOl.UMli

- to restore t'aciory settings

("r(')NTiNia- TO Al’TO PROGRAM'.’" w ill

apjx'ar on the screen. Press CHANNPd. + to

execute or CHANNHL - to exit).

• Press SPT UP to exit.

Adjusting the
Convergence
Automatically (FLASH

FOCUS)

Tlic projection tube image appears oti the screen in
three layers (red. green and blue). If they do not
converge, the color is poor and the picture blurs.

Before you use your projection TV, be sure to
adjust the convergence.

The FLASH FOCUS feature allows you to adjust

the convergence automatically.

Tip V

• It is recommended to perform FLASH FOCUS

about 30 minutes after the projection TV is tirst
turned on.

Receive a TV or cable TV program.

Press FLASH FOCUS.

rite cross |taitern appears and FI .\Sll FOCUS

begins lo work- rite adjustment is completed
w hen the cross pattern becomes w bite.

To obtain an optimum convergence

The optimum convergence alignment varies with
digital TV formats. Therefore, perform FLASH

FOCUS periodically on conventional and digital

TV programs. Also, whenever you find that the

picture blurs, press FLASH FOCUS.

Note:

• You cannot perform any other functions until

FLASH FOCUS has completed its cycle.

• If you perform any other operation while FLASH

FOCUS is in progress, PT.ASH FOCUS operation
is canceled.

This manual is related to the following products:

KP-53XBR300