Sony STR-D1011 - Manual (Page 9)

Connecting to the Power Outlet
By connecting the power cord of the other audio equipment
to SWITCHED AC OUTLET, this unit can supply the power
source to the other audio equipment.
o l JJ!
JiL
Selecting the Mode of the FUNCTION/SOUND
FIELD/PRESET TUNING Buttons
There are two kinds of modes for the FUNCTION/SOUND
FIELD/PRESET TUNING buttons. One is the "Auto mode"
and the other is the "Manual mode".
• Auto mode
The FUNCTiON/SOUND FIELD/PRESET TUNING buttons
are factory preset to the auto mode:
After one of the FUNCTION buttons, SOUND FIELD LINK,
SOUND FIELD ON/OFF or SOUND FIELD USER/PRESET is
pressed, the FUNCTION/SOUND FIELD/PRESET TUNING
buttons change to the SOUND FIELD mode automatically.
When TUNER is pressed, these buttons function as
numeric buttons.
• Manual mode
When you press the POWER switch while pressing MODE
SELECT, the FUNCTION/SOUND FIELD/PRESET TUNING
buttons are set to the manual mode.
With MODE SELECT, you can select the desired mode.
To return to the auto mode, perform the same procedure
again.
Caution
Be careful that the total power consumption of each
equipment connected to the outlets on the receiver does not
exceed 120 watts.
Do not connect electrical home appliances such as an
electric iron, fan, TV, or other high-wattage equipment to
these outlets.
9