Adjusting the surround effect, Press the desired sound field program, Press л or v to select the desired parameter – Sony STR-D1011 User Manual
Page 33: Adjust the parameter by pressing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Surround Effect
Before adjusting parameters, play back the program
source. You can adjust parameters while listening to the
actual sound.
Press USER/PRESET to set to the USER mode
when you store your private setting or to set to
the PRESET mode when you do not store your
setting.
Press the desired SOUND FIELD program.
3
Press CURSOR MODE to select the SUR
(surround) mode.
The SUR (surround! indicator lights up.
Press
Л
or
V
to select the desired parameter.
Adjust the parameter by pressing .
When you store a new SOUND FIELD effect
The previous SOUND FIELD effect is erased and the new
one will be replaced.
Even if AC power cord is disconnected
The stored data is maintained for approximately 1 month.
When selecting ACOUSTIC
ACOUSTIC does not have the surround effect and only the
equalizer effect can be available. So when selecting
ACOUSTIC, only the setting of parametric equalizer can be
adjusted.
Tips for adjusting the main parameters
The following procedure allows you to make the desired
sound field more effectively.
1 Select the desired factory-preset sound field program.
2 Adjust the effect level.
3 Adjust the reverberation time.
4 Adjust other parameters, it necessary.
33