Sony STR-D1011 - Manual (Page 12)

Identifying the Parts and Controls
rn Receiver control section
FUNCTION:
DAT, CD, TUNER, PHONO, VIDEO 1, VIDEO 2, VIDEO
3, TAPE, DIGITAL 1,2: The each function Is selected
and the each unit enters its operating mode
automatically. (DIGITAL 1 and 2 do not function.)
SYSTEM OFF; Turns off the power of the whole system.
POWER: Turns on the power of the receiver
SOUND FIELD buttons
U/P (user/preset): Selects the USER or PRESET mode.
MODE: Selects the sound field mode.
ON/OFF: Turns on/off the sound field system.
BAND: Selects the frequency band of the equalizer,
EO: Turns on/off the setting of TONE controls.
T. (test) TONE: Generates a pink noise signal that is
sent in succession to each speaker.
CURSOR MODE: Select CURSOR MODE.
CURSOR operating buttons
REAR LEVEL +/- buttons: Control the volume of rear
speakers (surround level).
CENTER LEVEL +/- buttons : Control the volume of
center speaker (surround level).
DBFB button: Turns on/off the DBEB (Dynamic Bass
Feedback).
MUTING button: Mutes the sound.
MASTER VOL +/- buttons: Control the reoeiver
volume.
' SLEEP: Set to the SLEEP timer mode. In this mode, the
unit is automatically turned off after the designated
time.
I
Other equipment control section
Numeric buttons (1 to 0): Designate the number.
ENTER: Press after designating the TV/VCR channel.
SHIFT: Select the memory page (A, B or C).
TV/VIDEO selector: Selects the program to see : TV or
VIDEO,
ANT TV/VTR button: Selects the output signal from the
antenna terminal on the VCR, either a TV signal or
VCR programs.
CH/PRESET +/-buttons: Select a preset channel,
INDEX: Set to the index tuning mode.
◄◄/►►: Fast winding/manual search
• : Recording
◄/►: Play
■: Stop
II: Pause
!◄◄/►►!: Locates a desired selection.
REV/FWD: Press • and REV or FWD at the same time,
D (disc) SKIP: Disc skip (for a CD player equipped
with a multi-disc changer)
SELECT: Changes the settings of the FUNCTION
buttons.
Notes
• The button which has no name does not function.
• When designating the selection number which is more
than 10 in the CD, DAT or LD mode, press after
pressing the appropriate numeric buttons.
1 SYSTEM/TV mode switch
In TV mode (When setting the SYSTEM/TV selector
to TV)
Only MUTING, MASTER VOL
+!-
and the operative
buttons in TV section on the list described on the next
page can be used.
12