Editing a video source, Video tape dubbing, Select the playback vcr with edit video – Sony STR-D1011 User Manual
Page 25: Set the playback vcr to the playback mode, 4 set the vcr 1 to the recording mode, Video tape editing, To switch the playback vcr during dubbing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing a Video Source
Video Tape Dubbing
If the AUDIO indicator is lit on the display, press the EDIT
AUDIO button to make the indicator go out.
Video signals
Select the playback VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that "2i> 1"
appears on the display.
To select VCR 3, press EDIT VIDEO so that "3i> 1"
appears on the display. '
Press VIDEO 2 or VIDEO 3 to select the video
signal to monitor on the monitor TV according to
the VCR to be played.
VIDEO 2: for the VCR 2
VIDEOS: for the VCRS
Set the playback VCR to the playback mode.
4
Set the VCR 1 to the recording mode.
Dubbing will start.
— Video Tape Editing —
To switch the playback VCR during dubbing
Press EDIT VIDEO. Each time you press the button, the
playback VCR switches from the VCR 2 to the VCR 3 (or the
VCR 3 to the VCR 2).
To view the other video source(s) on the monitor TV
during dubbing
Press the appropriate function selector, VIDEO 1, VIDEO 2,
or VIDEOS.
To listen to an audio program during video tape dubbing
t Press the appropriate function selector.
2 Start the selected audio program source.
25