Sony MHC-F100 - Manual (Page 33)

DJ Effects
Looping part of a CD
— Loop
Flashing part of a CD
— Flash
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
jog dial LOOP/DELETE
Press and hold LOOP/DELETE
during playback at the point you
want to start the Loop function, and
release to resume normal play.
To adjust the loop length
Turn the jog dial while holding LOOP/
DELETE (or press ♦ or ♦ while holding
LOOP/DELETE on the remote) to select
different loop lengths (LOOP 1 - 20).
With the flash function, you can "flash" the
CD sound during playback. This lets you
create original recordings.
jog dial FLASH
Press and hold PLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Turn the jog dial while holding FLASH to
select different flash lengths (FLASH 1 - 20).
To adjust the flash length on the remote,
press ♦ or ♦ while holding FLASH. (For
MHC-F50 only)
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
• .The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the flash effect, use the analog (VIDEO/
MD OUT) connections or this uiut's tape deck.
33