To stop recording, Playing a tape – Sony MHC-F100 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording from the radio
(continued)
4
Press = EJECT and insert a blank
tape into deck B.
-With the side
you want to
record facing
forward
5
Press REC O.
Deck B stands by for recording.
6
Press DIRECTION repeatedly to
select to record on one side.
Select c;^5(or RELAY) to record on
both sides.
7
Press PAUSE 00.
Recording starts.
To stop recording
Press □ STOP.
Tips
• If you want to record from the reverse side, press
TAPE B <] so that -O (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• You can still rewind or fast-forward Deck B by
pressing the « or » keys on the main unit,
even while using the tuner.
• To record non-preset stations, select "MANUAL"
in step 2, then turn the jog dial to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR B" appears before step 7.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (CrO:) or TYPE I\' (metal),
since the deck autoniaticallv detects the tape
type.
DOLBY NR
II
■ VOL +/-
18