Recording from a tape – Sony MHC-F100 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a
tape
—
H igh-speed D ubbing
You can use TYPE I (normal) or TYPE II
(Cr02) tapes. The recording level is
automatically adjusted.
POWER
3 1
DOLBY NR
1
Press = EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
With the side
you want to
play/record
facing forward
2
Press HI-SPEED DUBBING.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select to record on one side.
Select
(or RELAY) to record on
both sides.
4
Press PAUSE DO.
Dubbing starts.
To stop dubbing
Press □ STOP.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• I f you set DIRECTION to CZI? when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• When you record a tape recorded with Dolby NR
B in deck A, press DOLBY NR so that "DOLBY
NR B" disappears.
The tape is recorded with Dolby NR B.
20