Recording from the radio – Sony MHC-F100 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To listen to non-preset radio

stations

Press TUNING MODE repeatedly until
"MANUAL” or "AUTO” appears in step

then tune in the station by turning the jog
dial.

Tips

• Pressing TUNER/BAND when the power is off

automatically turns the power on and tunes to the
last received station (One Touch Play).

• You can switch from another source to the radio

just by pressing TUNER/BAND (Automatic
Source Selection).

• When an FM program is noisy, press

STEREO/MONO repeatedly until "MONO"
appears in the display. There will be no stereo
effect, but the reception will improve. Press the
button again to restore the stereo effect.

• To improve broadcast reception, reorient the

supplied antennas.

Recording from the
radio

You can record the radio program on a tape
by calling up a preset station. You can use
TYPE 1 (normal) or TYPE II (CrQz) tapes. The
recording level is automatically adjusted.

POWER

DOLBY NR DSTOP

1 4

Press TUNER / BAND repeatedly

until the band you want appears.

Press TUNING MODE repeatedly

until "PRESET" appears.

Turn the jog dial to tune in the

desired preset station.

t*
o

Turn counter

clockwise

for

lower

preset

numbers.

Turn clockwise

for higher
preset numbers.

Preset number Frequency

„ F M ’ 3 ' ' 1 0 4 . 0 0 « ^

continued