Sony MHC-F100 - Manual (Page 14)

Playing a CD (continued)
To You need to
Stop play Press □ STOP.
Pause Press CD >011 (II on the
remote).
Resume playing
after pause Press CD Olio (II on the
remote).
Select a CD Turn the jog dial clockwise
(or press ♦ on the remote)
or counterclockwise (or
press ♦ on the remote) and
release it when you reach
the desired CD.
Select a track During play or pause, press
ООН (to go forward) or (KK
(to go back) until you reach
the desired track.
Advance or return
10 CDs at a time
Press ♦ on the remote (to
move 10 CDs ahead) or ♦
(to move 10 CDs back).
Find a point of a
track Press and hold down ►►
(to go forward) or (to
go back) on the remote
during a play and release it
at the desired point.
Play only the CD
you have selected Press CONTINUE
repeatedly until "1 DISC"
appears.
Play all CDs Press CONTINUE
repeatedly until "ALL
DISCS" appears.
Adjust the volume Turn VOLUME (or press
VOL +/- on the remote).
Stop playing and
remove the disc Open the front cover, then
press ENTER.
The PLUS ONE slot comes
out automatically when the
front cover is opened while
the CD PLUS ONE button
is lit up.
VVhilo playing a disc, turn the jog dial until
the desired disc number (or disc title) and
"NEXT" appears. To skip to the next disc
right away, press ENTER.
To specify the next CD to play
To cancel the specified disc, press
CONTINUE twice.
Tips
• Pressing CD OOfl when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing CD
C>flO (Automatic Source Selection).
• If there is no CD in the player, "“NO DISC-"
appears.
14