Sony MHC-F100 - Manual (Page 10)

Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
MHC-FRl is used for illustration purpose.
Connecting a VCR
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, press FUNCTION repeatedly
until "VIDEO" appears.
To the audio output of the VCR
If the sound is distorted when selecting "VIDEO",
switch to "MD" {see "Before connecting an MD
deck" on this page).
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Before connecting an MD deck
Press FUNCTION repeatedly until "MD"
appears on the display.
When "VIDEO" appears by pressing
FUNCTION, change the indication to "MD"
following the procedure.
1. Press FUNCTION repeatedly until
"VIDEO" appears.
2. Turn the power off, then press POWER
while holding down GROOVE.
"VIDEO" on the display will switch to
"MD".
To return to "VIDEO", repeat the same step.
Connecting an MD deck for digital
recording (For MHC-FIOO/MHC-FRI
only)
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
10