To cancel labeling, To check the station name of the current station, To erase the name – Sony DHC-MD555 User Manual
Page 70: If you made a mistake, To erase the character
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7
Press CURSOR to enter the
character.
The cursor shifts rightward and waits for
the input of the next character.
Cursor
Labeling the preset stations
(continued)
■*T'
FM 3
0 7. 5MHz™
To cancel labeling
Press MENU/NO.
To check the Station Name of the
current station
Press UPPER DISPLAY.
Each time you press the button, the display
changes as follows:
r—► Preset Equalizer name —*• Clock-
^— Station name ^ Volume ♦—
To erase the name
Start over from step 1, then press CLEAR
repeatedly after step 4 to erase the name.
8
Repeat steps 5 to 7 to complete the
name.
If you made a mistake
Press CURSOR ♦— or —► until the
character you want to change flashes,
then repeat steps 5 to 7.
To erase the character
Press CLEAR. Each time you press the
button, the character at the position of
the cursor is erased.
You cannot insert characters.
9
Press ENTER/YES to complete the
labeling procedure.
The fíame is stored in the system
memory.
70